红光火焰信号使用说明
点击数:7929 次 录入时间:03-04 11:56:46 整理:http://www.55dianzi.com 操作规程
红光火焰信号使用说明
Using instruction for red flare signal
一, 简介:
Brief instruction:
该信号是为了使在附近航行的船舶,飞机能及时发现救生艇,筏,以便获取更多的救助机会。我轮共有红光火焰信号6枚,存放于救生艇内,作为夜间近距离的救生信号使用。
Red flare signal is used for raise the attention of ships and planes in vicinity to lifeboats and life-rafts at sea. And gain chances for been rescued .there are 6 signals of this kind on our ship, in lifeboat.
二,使用说明
Operation procedure:
1. 将把柄旋转180度
Turn the handle 180 degree
2. 一手握住把柄,一手拉红火信号的前盖,前盖连接发火绳发火
Grasp the handle, and pull the up cover ,
3. 将手臂抬高,发一分钟红光
Raise arms ,the signal lighted for 1 minute with red flame.
4. 对着空旷处燃烧
Toward the space
三,注意事项
Note:
1. 避免火渣掉下来灼伤人员
Be careful of hurt by heat
2.使用时人员应站在上风处,将信号置于下风处。
Let the signal at your leeside
3.在易燃易爆气体环境时慎用
Used with caution when in explosive atmosphere .
本文关键字:红光 操作规程,机械设备 - 操作规程