抛绳枪操作规程

 抛绳枪操作规程    PROCEDURE FOR LINE-THROWING APPLIANCE    1.将抛射绳后端系固在船上，将抛射体细钢索与抛射绳连接在一起，注意抛射绳不要扭缠或打结。    Tie the end of line to the steady parts of the ship , connect the line and the steel line on the throwing part, ensure the line no twist, tangle and overlapping.    2.将底火装入发射筒底部拧紧。    Fit cartridge into firing tube on the bottom side using screw driver until the end of cartridge come to the rear surface of firing tube and stop .     3.将保险栓后拉至“f”位置时再扳向右侧，到“s”位置，上好保险。    Pull the handle of firing gun to "F" Position ,then turn right to the position marked with " S"     4.将发射筒和发射器组装在一起。    Fix together the prepared firing gun and firing tube     5.将抛射体放入抛射筒内。    Insert the prepared rocket into the firing tube , position of both feet must be at a level.    6.去掉保险，双手紧紧持住抛绳枪对准目标方向，扣动扳机发射。    Turn the handle left to the "F" Position , aimed at the aim ,pull the triggler. The wire must hung rightly and have no twist and tangle.  

本文关键字：暂无联系方式操作规程，机械设备 - 操作规程